Painting for wood, fiber cement and vinyl-safe siding with careful prep, the right primers and even, durable coverage.
Siding takes the brunt of the weather, and each material needs its own approach. Wood siding needs scraping, priming and flexible paint to handle swelling and shrinking. Fiber cement is stable but needs a good primer and careful caulking at joints. Older aluminum or vinyl siding can be painted with the right products and light colors. In Nashville, where humidity can grow mildew on the north side of a house in months, siding painting must begin with cleaning and a clear plan for each surface.
We identify the siding type, wash away mildew and chalk, scrape and sand failing paint, prime bare spots and apply two coats of paint matched to the material. We caulk seams, trim joints and nail holes, and we brush or back-roll after spraying so paint is worked into the surface for a strong bond. Color choices are discussed with attention to heat and fading, since dark colors on vinyl and some fiber cement boards need special coatings. The result is a clean, uniform finish.
Wood, fiber cement and vinyl each need different primers, paints and prep, and we match the system to the surface.
Mildew, dirt and chalk are removed so paint bonds to a clean, sound surface.
Spraying is fast, and back-rolling pushes paint into the surface for adhesion and an even look.
Dark colors on vinyl or thin boards can warp, so we recommend coatings that suit the material.
Drag the handle to compare.
BeforeAfterRight system for the material.
A clean base.
Loose paint gone.
Water sealed out.
Even, durable finish.
Full coverage and protection.
Every topic has its own page with what to expect and how we approach it.
Topic guidePaint, Stain and SealerHow paint, transparent and solid stains and clear sealers differ for decks, fences, siding and interior wood.Learn more 
Topic guideHow Long Paint LastsTypical lifespans for interior walls, trim, exteriors, decks and cabinets, and the habits that help paint last longer.Learn more 
Topic guidePaint Problems and CausesPeeling, bubbling, cracking, chalking, mildew, stains and uneven sheen: what causes each and how to fix them properly.Learn more Enter room sizes, doors, windows and coats to see how many gallons of paint and primer you need.
You tell us what you want painted or repaired and when, and we set an estimate visit that fits your day.
We look at the walls, ceilings, trim or exterior, check the condition and note repairs and prep.
You get a plain written scope with products, coats and schedule, and help choosing colors and sheens.
We protect your home, then clean, scrape, sand, patch, caulk and prime so paint bonds and lasts.
We paint ceilings, walls, trim and doors in order, with proper dry time and clean, crisp lines.
We clean up, walk the finished work with you, fix touch-ups and explain how to care for the finish.
Often yes, with the right paint and a color that is not much darker than the original, to avoid heat warping.
Yes. It takes paint very well with proper primer and caulking at the joints.
Spraying is fast and even, and back-rolling improves adhesion. We often combine both.
We wash with a mildew-killing cleaner and rinse well before priming and painting.
Yes. We help choose a new color and plan for coverage, especially for lighter-to-darker shifts.
Exterior PaintingFull exterior repaints with washing, scraping, repairs, priming and two coats of weather-ready paint for Middle Tennessee homes.Explore 
Trim, Soffit and Fascia PaintingExterior trim, soffit, fascia, window and door casing painting with wood repair and flexible, long-lasting coatings.Explore 
Pressure Washing Before PaintingSoft and pressure washing that removes dirt, mildew and chalk so new paint or stain bonds and lasts.Explore 
Brick PaintingPainting brick with masonry primer and breathable coatings for a fresh look, with honest advice about the permanent…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
