Hanging, taping, mudding and sanding new drywall for additions, basements, garages and whole-house remodels.
New drywall is the canvas for everything that follows. Good installation means sheets that are cut accurately, fastened at the right spacing, hung to minimize seams and finished so smoothly that paint shows no joints at all. Poor installation shows up later as popped screws, cracked seams, nail pops and wavy walls that catch light at a low angle. In Nashville, where renovation and new construction keep many homes in motion, drywall is often the step that decides whether the final paint looks professional or patched.
We measure each room, plan sheet layout to cut seams, choose the right thickness and type for walls, ceilings, wet areas and fire-rated spots and hang the board tight to the framing. Joints are taped, coated in several thin coats of compound and sanded smooth between coats. We prime the finished surface and can apply the texture you want or leave smooth walls ready for paint. Because we also paint, you get one team from framing to final color.
Planning sheet placement to reduce seams and keep joints off high-stress areas helps prevent cracks later.
Standard, moisture-resistant, fire-rated and soundproof boards each have a place, and we match them to the job.
Multiple thin coats of compound, sanded smooth, give a wall that looks flat even under raking light.
Drywall and paint come from the same team, so the finish is planned with the final color in mind.
Fewer seams.
Matched to each room.
No popped screws.
Strong, flat seams.
A smooth wall.
Ready for paint.
Every topic has its own page with what to expect and how we approach it.
Topic guideDrywall Types and ThicknessesStandard, moisture-resistant, fire-rated, lightweight and soundproof drywall, and where quarter-inch to five-eighths-inch board belongs.Learn more 
Topic guideDrywall Finish LevelsWhat finish levels zero through five mean, which to choose for your paint and lighting and why smoother…Learn more 
Top brandUSG SheetrockA Chicago-based drywall maker whose Sheetrock brand board and joint compounds are among the best-known names in the…Learn more Enter wall and ceiling sizes to see how many sheets, how much compound, tape and screws a drywall job needs.
You tell us what you want painted or repaired and when, and we set an estimate visit that fits your day.
We look at the walls, ceilings, trim or exterior, check the condition and note repairs and prep.
You get a plain written scope with products, coats and schedule, and help choosing colors and sheens.
We protect your home, then clean, scrape, sand, patch, caulk and prime so paint bonds and lasts.
We paint ceilings, walls, trim and doors in order, with proper dry time and clean, crisp lines.
We clean up, walk the finished work with you, fix touch-ups and explain how to care for the finish.
A single room may take several days including drying time between coats. We give a schedule at the estimate.
Yes. We match orange peel, knockdown and other textures where new work meets old.
Half-inch for most walls, five-eighths for ceilings and fire-rated areas, depending on code and the job.
Yes, and we recommend moisture-aware planning, including moisture-resistant board where it fits.
Yes. Painting is our main work, so we can finish the whole project.
Drywall Taping and FinishingTaping, mudding and sanding to the finish level your paint needs, from standard to smooth skim-coated walls.Explore 
Garage and Basement DrywallHanging and finishing drywall in garages and basements with moisture awareness, fire-rated options and clean results.Explore 
Drywall for Additions and RemodelsDrywall hanging and finishing for room additions, wall removals and whole-house remodels with matching textures.Explore 
Soundproof Drywall InstallationSound-damping drywall assemblies for music rooms, home offices, bedrooms and shared walls in Music City homes.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
